Monitor Audio Anthra W10 Subwoofer
The Monitor Audio Anthra W10 Subwoofer is the most compact model in the Anthra subwoofer range. It features a 10ā (25 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver, powered by a 500 Watt Class-D amplifier. All of this is housed in a sealed-box cabinet, which is extensively internally braced for optimal performance. The design ensures that the subwoofer delivers deep, agile bass in smaller to mid-sized spaces.
Features
- 1 x 10ā (25cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 500 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
- MaestroUnite Setup for Monitor Audio Anthra Subwoofers allows a user complete bespoke setup. Available to download from theĀ App StoreĀ andĀ Google Play.
Setup and Connectivity Features
The Anthra W10 subwoofer can be used independently or linked with up to three additional Anthra subwoofers, allowing for a dynamic, immersive listening experience. A full-colour LCD display and rotary dial on the rear panel provide easy access to basic setup and EQ preset selection. For more advanced features, such as DSP configuration and multi-subwoofer connectivity, the MaestroUnite app offers a user-friendly interface to adjust the settings for an enhanced audio experience.
Specifications
| System format: | Active ā Sealed Cabinet |
| Drive unit complement: | 1x 10" (254 mm) High Linear-Excursion Triple Suspension Driver |
| Amplifier classification: | High-Efficiency Class-D |
| Lower frequency limit: | -6dB @17Hz |
| Upper frequency limit: | (LPF Off) -6dB @400Hz |
| Driver excursion (pk-pk): | 50 mm |
| DSP: | 28 Bit 50 MIPS Configurable through MaestroUnite |
| Analogue digital conversion: | Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals |
| Amplifier output power, 240Vac: | Instantaneous: 500 W* Continuous short-term: 425 W** |
| Amplifier output power, 120Vac: | Instantaneous: 450 W Continuous short-term: 390 W |
| LED UI control: | Brightness, On-Off |
| Phase control: | 0-360 Degrees measured at LPF Crossover |
| Low pass filter: | 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct |
| Custom EQ: | Configurable through MaestroUnite; 3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass) |
| Volume level: | Wide adjustable input gain to allow maximum output from a wide range of input signals |
| Inputs: | Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE) Mono/LFE Balanced XLR |
| Outputs: | Stereo unbalanced outputs with unbuffered throughput from RCA Inputs Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input |
| Mains input voltage: | Universal Mains, 85-265VAC |
| External dimensions (without feet) (HxWxD): | 321 x 321 x 321 mm |
| Power consumption: | 120 W |
| Cabinet construction: | Braced 18 mm thick MDF with 36 mm front baffle |
| Grille: | Cloth covered magnetically attached Grilles |
| Weight: | 20.06 kg (44 lb 1 oz) |
| Note: | * Maximum RMS output for an instantaneous signal ** Sinewave for 10 seconds |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Monitor Audio Anthra W10 Subwoofer
Monitor Audio Anthra W10 Subwoofer
The Monitor Audio Anthra W10 Subwoofer is the most compact model in the Anthra subwoofer range. It features a 10ā (25 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver, powered by a 500 Watt Class-D amplifier. All of this is housed in a sealed-box cabinet, which is extensively internally braced for optimal performance. The design ensures that the subwoofer delivers deep, agile bass in smaller to mid-sized spaces.
Features
- 1 x 10ā (25cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 500 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
- MaestroUnite Setup for Monitor Audio Anthra Subwoofers allows a user complete bespoke setup. Available to download from theĀ App StoreĀ andĀ Google Play.
Setup and Connectivity Features
The Anthra W10 subwoofer can be used independently or linked with up to three additional Anthra subwoofers, allowing for a dynamic, immersive listening experience. A full-colour LCD display and rotary dial on the rear panel provide easy access to basic setup and EQ preset selection. For more advanced features, such as DSP configuration and multi-subwoofer connectivity, the MaestroUnite app offers a user-friendly interface to adjust the settings for an enhanced audio experience.
Specifications
| System format: | Active ā Sealed Cabinet |
| Drive unit complement: | 1x 10" (254 mm) High Linear-Excursion Triple Suspension Driver |
| Amplifier classification: | High-Efficiency Class-D |
| Lower frequency limit: | -6dB @17Hz |
| Upper frequency limit: | (LPF Off) -6dB @400Hz |
| Driver excursion (pk-pk): | 50 mm |
| DSP: | 28 Bit 50 MIPS Configurable through MaestroUnite |
| Analogue digital conversion: | Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals |
| Amplifier output power, 240Vac: | Instantaneous: 500 W* Continuous short-term: 425 W** |
| Amplifier output power, 120Vac: | Instantaneous: 450 W Continuous short-term: 390 W |
| LED UI control: | Brightness, On-Off |
| Phase control: | 0-360 Degrees measured at LPF Crossover |
| Low pass filter: | 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct |
| Custom EQ: | Configurable through MaestroUnite; 3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass) |
| Volume level: | Wide adjustable input gain to allow maximum output from a wide range of input signals |
| Inputs: | Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE) Mono/LFE Balanced XLR |
| Outputs: | Stereo unbalanced outputs with unbuffered throughput from RCA Inputs Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input |
| Mains input voltage: | Universal Mains, 85-265VAC |
| External dimensions (without feet) (HxWxD): | 321 x 321 x 321 mm |
| Power consumption: | 120 W |
| Cabinet construction: | Braced 18 mm thick MDF with 36 mm front baffle |
| Grille: | Cloth covered magnetically attached Grilles |
| Weight: | 20.06 kg (44 lb 1 oz) |
| Note: | * Maximum RMS output for an instantaneous signal ** Sinewave for 10 seconds |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Monitor Audio Anthra W10 Subwoofer is the most compact model in the Anthra subwoofer range. It features a 10ā (25 cm) Rigid Surface Technology II (RST II) C-CAM high-excursion driver, powered by a 500 Watt Class-D amplifier. All of this is housed in a sealed-box cabinet, which is extensively internally braced for optimal performance. The design ensures that the subwoofer delivers deep, agile bass in smaller to mid-sized spaces.
Features
- 1 x 10ā (25cm) Rigid Surface Technology II (RST II) and ceramic-coated aluminium magnesium (C-CAM) high-excursion driver for super-clean performance
- 1 x 500 Watt Class-D amplifier ensures that the driver is working to its optimum performance level, no matter what the volume
- Massive motor assembles and longer round-wound voice coils, which are dual layered and made of copper-coated aluminium wire (CCAW) for precise control at extreme low frequencies
- 2 inch full-colour LCD display screen with rotary dial for menu selection and basic setup
- RCA inputs (left/right. The left Input is LFE)
- RCA outputs allows daisy chain of up to 4 Anthra subwoofers
- XLR inputs for professional installation connectivity option
- XLR outputs allows daisy chain of up to four Anthra subwoofers
- Available in Gloss Black and Satin White finishes
- MaestroUnite Setup for Monitor Audio Anthra Subwoofers allows a user complete bespoke setup. Available to download from theĀ App StoreĀ andĀ Google Play.
Setup and Connectivity Features
The Anthra W10 subwoofer can be used independently or linked with up to three additional Anthra subwoofers, allowing for a dynamic, immersive listening experience. A full-colour LCD display and rotary dial on the rear panel provide easy access to basic setup and EQ preset selection. For more advanced features, such as DSP configuration and multi-subwoofer connectivity, the MaestroUnite app offers a user-friendly interface to adjust the settings for an enhanced audio experience.
Specifications
| System format: | Active ā Sealed Cabinet |
| Drive unit complement: | 1x 10" (254 mm) High Linear-Excursion Triple Suspension Driver |
| Amplifier classification: | High-Efficiency Class-D |
| Lower frequency limit: | -6dB @17Hz |
| Upper frequency limit: | (LPF Off) -6dB @400Hz |
| Driver excursion (pk-pk): | 50 mm |
| DSP: | 28 Bit 50 MIPS Configurable through MaestroUnite |
| Analogue digital conversion: | Autoranging Input which combines a 10Vrms maximum input with low signal to noise for small signals |
| Amplifier output power, 240Vac: | Instantaneous: 500 W* Continuous short-term: 425 W** |
| Amplifier output power, 120Vac: | Instantaneous: 450 W Continuous short-term: 390 W |
| LED UI control: | Brightness, On-Off |
| Phase control: | 0-360 Degrees measured at LPF Crossover |
| Low pass filter: | 20-200Hz LPF with Roll off Adjustable from -3 to -48dB/Oct |
| Custom EQ: | Configurable through MaestroUnite; 3 pre-defined EQ curves plus 3 custom EQ curves each with 8 band custom EQ supporting (Peaking, High Shelf, Low Shelf, High Pass) |
| Volume level: | Wide adjustable input gain to allow maximum output from a wide range of input signals |
| Inputs: | Stereo Unbalanced RCA (or mono/LFE using only connector marked LFE) Mono/LFE Balanced XLR |
| Outputs: | Stereo unbalanced outputs with unbuffered throughput from RCA Inputs Mono/LFE Balanced XLR outputs with unbuffered throughput from XLR Input |
| Mains input voltage: | Universal Mains, 85-265VAC |
| External dimensions (without feet) (HxWxD): | 321 x 321 x 321 mm |
| Power consumption: | 120 W |
| Cabinet construction: | Braced 18 mm thick MDF with 36 mm front baffle |
| Grille: | Cloth covered magnetically attached Grilles |
| Weight: | 20.06 kg (44 lb 1 oz) |
| Note: | * Maximum RMS output for an instantaneous signal ** Sinewave for 10 seconds |
